SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION
2-6
31215918
2.4 WALK-AROUND INSPECTION
Begin the Walk-Around Inspection at item 1. Continue checking each
item in sequence for the conditions listed in the following checklist.
TO AVOID POSSIBLE INJURY, BE SURE MACHINE POWER IS “OFF”. DO NOT OPERATE
UNTIL ALL MALFUNCTIONS HAVE BEEN CORRECTED.
NOTICE
DO NOT OVERLOOK VISUAL INSPECTION OF CHASSIS UNDERSIDE. CHECKING THIS
AREA MAY RESULT IN DISCOVERY OF CONDITIONS WHICH COULD CAUSE EXTENSIVE
MACHINE DAMAGE.
INSPECTION NOTE:
On all components, make sure there are no loose or
missing parts, that they are securely fastened, and that no visible damage,
leaks or excessive wear exists in addition to any other criteria mentioned.
1. Frame/Chassis/Ladder
–
See Inspection Note. Ensure that
pothole protection (PHP) components on frame are in place,
undamaged, not bent or worn. Side compartment doors
open and close properly.
2. Ground Controls
–
Placard secure and legible, control
switches return to neutral position when activated and
released, emergency stop switch functions properly. Control
markings legible.
3. Hydraulic Pump/Motor, Control Valve Installation
–
No
unsupported wires or hoses; no damaged or broken wires.
Refer to Inspection Note
.
4. Front Wheels, Tires, Drive Motor, Steer Linkage, and
Steer Cylinder
–
Wheel bolts properly secured (refer to
wheel and tire information in Section 6.5). Refer to Inspec
-
tion Note.
5. Battery Compartment –
Refer to Inspection Note.
6. Rear Wheels and Tires
–
Wheel bolts properly secured
(refer to wheel and tire information in Section 6.5). Refer to
Inspection Note.
7. Manual Descent Control
–
Refer to Inspection Note.
8. Beacon(s) (If Equipped)
–
Refer to Inspection Note.
9. Scissor Arms, Pivot Pins, Sliding Wear Pads, Lift Cylinder
–
Refer to Inspection Note.
10. Platform/Rail Gate Assembly –
Deck extension slides in
and out and locks in place properly. Gate closes properly. All
fold-down rail pins (if equipped) in place and secure. Refer to
Inspection Note.
11. Platform Control Console
–
Ensure that the control console
is firmly secured in the proper location. Placards secure and
legible, control lever and switches return to neutral when
activated and released, and emergency stop switch function
properly, required manuals in storage box.
12. Static Strap
–
Refer to Inspection Note.
To
order
go
to
Discount-Equipment.com
