SECTION 6 - GENERAL SPECIFICATIONS AND MAINTENANCE
31215918
6-11
6.5 OPERATOR MAINTENANCE
Scissor Arm - Safety Prop
NEVER WORK UNDER AN ELEVATED PLATFORM UNTIL IT HAS BEEN RESTRAINED
FROM MOVEMENT WITH THE SAFETY PROP, BLOCKING OR OVERHEAD SLING.
THE SAFETY PROP MUST BE USED WHENEVER MAINTENANCE PERFORMED ON THE
MACHINE REQUIRES THE SCISSOR ARMS TO BE RAISED AND ONLY WITH NO LOAD IN
THE PLATFORM
The safety prop is located on the side of the scissor arms on the right
side of the machine.
To engage the safety prop:
1.
From the Ground Control Station, raise the platform far
enough to allow the safety prop to be engaged.
2.
Rotate the prop assembly clockwise until it hangs vertically
on the side of the scissor arms.
3.
Lower the platform until the safety prop rests against the
safety prop stop on the arm set below it, stopping all down
-
ward movement of the platform/scissor arm assembly.
To disengage the safety prop:
1.
Raise the platform enough to release the safety prop off the
safety prop stop.
2.
Rotate the prop assembly counterclockwise until it is resting
on the arm prop holder plate on the side of the scissor arm
assembly.
Prop Engaged
Prop Disengaged
To
order
go
to
Discount-Equipment.com
