SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
3-10
31215918
Platform Emergency Stop Switch
NOTE:
Both the ground and platform emergency stop buttons must be
set to ON in order to operate the machine.
When power is directed to the platform from the ground control sta
-
tion, the platform emergency stop switch is turned on by pulling the
switch out (on), and is turned off by pushing the switch in (off). The
two-position, red, mushroom-shaped emergency stop switch functions
to provide power to the platform control station and also to turn off
power to machine functions in the event of an emergency.
NOTICE
ALWAYS POSITION EMERGENCY STOP SWITCH TO "OFF" POSITION (PUSHED IN) WHEN
MACHINE IS NOT IN USE.
Lift/Drive Select
NOTE:
When selecting between the Lift and Drive functions the joystick
control must be returned to the neutral position for approxi
-
mately 1/2 second before the function change is operable.
This toggle switch is used to select operation of either the drive or lift
function. After selecting a function, the joystick controller must be
moved in the proper direction in order to activate that function. Only
change the function selected, with the joystick in the neutral position.
Otherwise, the function selected will not change until the joystick is
returned to the neutral position.
Forward/Reverse/Lift/Lower Direction
Decal
This decal indicates the proper direction to mount
the platform control box, with the black arrow
pointing to the front of the machine. The black/
white arrow also indicates the direction to move
the joystick control per the lift/drive selector
switch decal for the lift and drive select functions.
To
order
go
to
Discount-Equipment.com
