SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
31215918
3-23
3.14 MACHINE LIFTING AND TIE DOWN
Lifting
The machine may be lifted using a fork lift truck. Lift only from the rear
of the machine and only with the platform in the stowed position.
Adjust the width of the
forklift truck, lifting tines (1)
to properly fit
the machine forklift pockets.
Slide the forklift tines into the forklift
pockets and carefully lift machine.
The machine can also be lifted using a spreader bar and four equal
length straps or chains capable of supporting the full gross weight of
the machine. Lift only using the lifting lugs provided at the four corners
of the machine.
LIFTING THE MACHINE FROM THE SIDES USING A FORK TRUCK IS NOT RECOMMENDED
BY JLG. IN THE EVENT THAT THE MACHINE NEEDS TO BE LIFTED FROM THE SIDES,
CAUTION MUST BE USED TO AVOID JAMMING THE POTHOLE PROTECTION BARS UP
AGAINST THE FRAME.
EVERY TIME THE MACHINE IS LIFTED FROM THE SIDE, BE SURE AND TEST THE POT
-
HOLE PROTECTION SYSTEM BEFORE THE MACHINE IS PUT BACK INTO OPERATION.
1704016 C
1
To
order
go
to
Discount-Equipment.com
