SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
31215918
3-11
Drive/Lift/Steer Joystick Control
Trigger (Enable) Switch
- This switch is located on the front of the joy
-
stick controller. The trigger switch acts as an enable and must be
depressed before operating the drive, steer and lift functions. When
released, the function being operated will stop.
NOTE:
Once the trigger switch is pressed, the operator has five seconds
to begin operating a function. After five seconds, release the trig
-
ger switch and press it again to operate a joystick function.
The speed on all selected functions is proportionally controlled
by the distance from the neutral (center) position of the joystick
controller.
NOTE:
If the machine is also equipped with a footswitch (Japanese or
Korean Specification only), the footswitch must be depressed in
conjunction with the trigger (enable) switch located on the joy
-
stick controller. Power is removed from the platform controls
when the footswitch is released.
Steer Switch
- The steer switch is a thumb operated switch located at
the top of the joystick controller handle. Depressing the switch to the
right will steer the wheels to the right. Depressing the switch to the left
will steer the wheels to the left.
Joystick Controller
- The control handle controls two functions: drive
and lift.
Steering And Traveling
DO NOT DRIVE WITH THE PLATFORM ELEVATED EXCEPT ON A SMOOTH, FIRM SURFACE
WITHIN THE LIMITS OF THE MAXIMUM OPERATING SLOPE THAT IS FREE OF OBSTRUC
-
TIONS AND HOLES.
TO AVOID LOSS OF TRAVEL CONTROL OR UPSET ON GRADES AND SIDESLOPES, DO NOT
DRIVE MACHINE ON GRADES OR SIDESLOPES EXCEEDING THOSE SPECIFIED IN SEC
BEFORE DRIVING, LOCATE THE DECALS WITH THE BLACK/WHITE ORIENTATION
ARROWS ON THE CHASSIS AND THE PLATFORM CONTROLS. MOVE THE JOYSTICK IN
THE DIRECTION OF THE BLACK OR WHITE ARROW THAT MATCHES THE COLOR OF THE
ARROW ON THE CHASSIS FOR THE INTENDED DIRECTION OF TRAVEL.
IF THE TILT INDICATOR WARNING LIGHT/ALARM IS ACTIVATED WHILE DRIVING WITH
PLATFORM RAISED, LOWER PLATFORM COMPLETELY AND DRIVE TO A SMOOTH, FIRM
SURFACE WITHIN THE LIMITS OF THE MAXIMUM OPERATING SLOPE.
1.
Place key selector switch at the ground control station to
platform operation.
2.
Position emergency stop switches, one at the platform and
one at the ground control station to the ON position.
To
order go
to
Discount-Equipment.com
