SECTION 6 - GENERAL SPECIFICATIONS AND MAINTENANCE
6-22
31215918
DTC
Help Message
Alarm
Flash
Code
Action
Trigger
001
EVERYTHING OK
None
None
· No Motion restrictions
•
Platform Mode and no Faults are active.
002
GROUND MODE OK
None
None
· No Motion restrictions
•
Ground Mode and no Faults are active.
003
ALARM SOUNDING – TILTED & ABOVE ELE
-
VATION
PF: Continuous
None
· No Motion restrictions
•
Platform is elevated and chassis is not level
004
DRIVING AT CUTBACK – ABOVE ELEVATION None
None
· DriveState = CREEP
•
Platform is elevated and the machine is in the drive mode of opera
-
tion
005
DRIVE & LIFT UP PREVENTED TILTED & ELE
-
VATED
PF: Continuous
None
• DriveState = PREVENTED
• LiftUpState = PREVENTED
•
Driving and lift up are not possible since the platform is elevated and
the chassis is not level.
006
LIFT UP PREVENTED – MAX HEIGHT ZONE A None
None
• LiftUpState = PREVENTED
•
The vehicle has reached the maximum height allowed by the Indoor/
Outdoor selection and further lift up motion is not possible.
007
DRIVING AT CUTBACK – POTHOLE STILL
ENGAGED
None
None
• DriveState = CREEP
•
While stowed, drive speed is reduced (due to lower ground clear
-
ance) since the control system detected that the pot-hole protection
mechanism is deployed (failed to retract).
•
Clear the obstacle blocking the pot-hole protection mechanism,
repair the mechanical problem, re-adjust the pot-hole limit
switches, or repair the wiring to correct the problem.
•
Alternately, there may be difficulty with the Elevation Angle Sensor
that causes the Control System to improperly believe the platform is
stowed.
To
order
go
to
Discount-Equipment.com
