Oshkosh Corporation JLG R2632, Operation And Safety Manual

Page: 40 / 108

SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
3-8
31215932
MDI Indicator (If Equipped)
The Multifunction Digital Indicator (MDI) displays a Battery Discharge
Indicator (BDI), a LCD display showing the current hourmeter read -
ing, a system distress LED, and Diagnostic Trouble Codes (DTC) when
a functional problem occurs with the machine.
When a problem occurs and a DTC Code is displayed:
• A LED wrench icon ( 1 ) illuminates.
• A three to five digit DTC code displays on the DTC LCD display ( 2 )
below the wrench icon.
NOTE:
When more than one DTC exists, each DTC will be displayed on
the LCD for 3 seconds before changing to the next DTC. Once the
last active DTC is displayed, the display will recycle indefinitely
until they are corrected.
Also located on the MDI are Battery Discharge Indicators (BDI) ( 3, 4,
5
). The three green LEDs indicate the level of charge (voltage)
remaining in the batteries.
NOTE: When the battery voltage is low and will need a charge soon, the
yellow LED (
4
) begin to flash.
BDIs and the hourmeter display under normal operating conditions.
When a DTC exists other than 00x, the BDI LEDs and hourmeter are
not displayed. Additionally, when the platform is elevated and the
machine is driving in creep mode, the turtle icon is displayed.
1.
System Fault LED Indicator (Red LED)
2.
Hourmeter/DTC Code Display
3.
100% Battery Charge Indicator (Green)
4.
Battery Charge Low Indicator (Yellow)
5.
Battery Re-Charge Indicator (Red)