![background image](http://html1.mh-extra.com/html/oshkosh-corporation/jlg-r2632/jlg-r2632_operation-and-safety-manual_1655775028.webp)
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
2-6
31215932
2.4 WALK-AROUND INSPECTION
Begin the Walk-Around Inspection at item 1 as noted on the Inspec
tion Diagram. Continue checking each item in sequence for the con
-
ditions listed in the following checklist.
TO AVOID POSSIBLE INJURY, BE SURE MACHINE POWER IS “OFF”. DO NOT
OPERATE UNTIL ALL MALFUNCTIONS HAVE BEEN CORRECTED.
NOTICE
DO NOT OVERLOOK VISUAL INSPECTION OF CHASSIS UNDERSIDE. CHECKING
THIS AREA MAY RESULT IN DISCOVERY OF CONDITIONS WHICH COULD CAUSE
EXTENSIVE MACHINE DAMAGE.
INSPECTION NOTE:
On all components, make sure there are no loose or
missing parts, that they are securely fastened, and that no visible dam
-
age, leaks, or excessive wear exists in addition to any other criteria men
-
tioned.
1. Frame/Chassis/Ladder
–
Ensure pothole protection (PHP)
components on frame are in place, undamaged, not bent or
worn. Side compartment doors open and close properly.
Refer to Inspection Note.
2. Rear Wheels, Tires, and Hydraulic Brakes –
Wheel nut
properly secured (refer to Section 6.7). Inspect wheels, steer
linkage, and steer cylinder for damage and corrosion. Check
hydraulic brake hoses for damage or leakage. Refer to
Inspection Note.
3. Ground Control Console
–
Placard secure and legible, con
-
trol switches return to neutral position when activated and
released, emergency stop switch functions properly. Control
markings legible.
4. Hydraulic Pump/Motor, Control Valve Installation
–
No
unsupported wires or hoses; no damaged or broken wires.
Refer to Inspection Note.
5. Front Wheels and Tires –
Wheel nut properly secured (refer
to Section 6.7). Inspect wheels, steer linkage, and steer cylin
-
der for damage and corrosion. Refer to Inspection Note.
6. Battery Compartment
–
Refer to Inspection Note.
7. Scissor Arm Stack Assembly, Pivot Pins, Slide Wear Pads,
Lift Cylinder
–
Refer to Inspection Note.
8. Platform/Rail/Gate Assembly –
Deck extension slides in
and out and locks in place properly. All fold-down rail pins (if
equipped) in place and secure. Refer to Inspection Note.
9. Magnetic Gate Latch
–
Gate swings freely and latches
securely.
10. Platform Control Console
–
Ensure the control console is
firmly secured in the proper location. Placards secure and
legible, control lever and switches return to neutral when
activated and released, and emergency stop switch function
properly, required manual(s) in storage box.
11. Safety Prop –
Refer to Inspection Note.
12. Platform Manual Descent –
Refer to Inspection Note.
13. Static Strap –
Refer to Inspection Note.
Summary of Contents for JLG R2632
