Oshkosh Corporation JLG R2632, Operation And Safety Manual

Page: 98 / 108

SECTION 6 - SPECIFICATIONS AND OPERATOR MAINTENANCE
6-20
31215932
008 FUNCTIONS LOCKED OUT – SYSTEM POW -
ERED DOWN
None None • Enter SafeMode
• LiftDownState = PREVENTED
• A period of time elapsed without activity and the Control System
entered a low-power state to preserve battery charge (2 hours). Cycle
the Ground EMS in GroundMode or the Platform EMS in PlatformMode
to re-enable the vehicle.
• Two hours (10 minutes if GroundMode) without Drive Forward, Drive
Reverse, Lift Up, Lift Down, Steer Left, or Steer Right.
• Timer resets if user changes PlatformMode/GroundMode
009 DRIVE PREVENTED – ELEVATED ABOVE
DRIVE CUTOUT HEIGHT
None None • DriveState = PREVENTED • The Drive Cutout functionality is enabled, and the Platform is Elevated
above the Calibrated Cutout Height.
211 POWER CYCLE None 2_1 • No Motion restrictions • This Help Message is issued at each power-up. This serves to indicate
which messages have been recorded in the failure log since the last
power-up event.
212 KEYSWITCH FAULTY None 2_1 • Force to GroundMode • Both the Ground Select and Platform Select signals are energized,
which means there is an issue with the keyswitch or one of the lines
are shorted to battery.
221 FUNCTION PROBLEM – HORN PERMA -
NENTLY SELECTED
None 2_2 • Horn Prevented • Horn Switch in the Platform Control Box was closed during power-up.
Release or repair the switch to clear the message.
2210 TRIGGER CLOSED TOO LONG WHILE IN NEU -
TRAL
None 2_2 • TriggerState = FALSE therefore
• DriveState = PREVENTED
• LiftUpState = PREVENTED
• LiftDownState = PREVENTED
• Trigger Switch on the Platform Control Box was closed for more than
five seconds while the Joystick (accelerator) was in the neutral posi -
tion (centered). Release switch or repair the switch / wiring to clear
the difficulty.
222 FUNCTION PROBLEM – INDOOR / OUTDOOR
PERMANENTLY SELECTED
None 2_2 • Previously selected Indoor / Out -
door Mode maintained
• Indoor / Outdoor Switch in the Platform Control Box was closed during
power-up. Release or repair the switch to clear the message.
DTC Help Message Alarm
Flash
Code
Action Trigger