Oshkosh Corporation JLG R2632, Operation And Safety Manual

Page: 26 / 108

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
2-4
31215932
2.3 PRE-START INSPECTION
The Pre-Start Inspection should include each of the following:
1. Cleanliness –
Check all surfaces for leakage (oil or battery
fluid) or foreign objects. Report this to the proper mainte -
nance personnel.
2. Structure – Inspect the machine structure for dents, dam -
age, weld or parent metal cracks, or other discrepancies.
Report this to the proper maintenance personnel.
3. Decals and Placards – Check all for cleanliness and legibil -
ity; clean or replace as necessary. Ensure none of the decals
and placards are missing (refer to Section 6.8).
4. Operation and Safety Manuals –
Ensure a copy of the
Operation and Safety Manual, AEM Safety Manual (ANSI
markets only), and ANSI Manual of Responsibilities (ANSI
markets only) is enclosed in the weather-resistant storage
container.
5. Walk-Around Inspection –
Perform as instructed in Section
2.4.
6. Battery –
Charge as required.
7. Hydraulic Oil Level – Check the hydraulic oil level in the
pump reservoir and add as required (refer to Section 6.6).
8. Accessories/Attachments – Refer to the Accessories section
in this manual or accessory installed upon the machine for
specific inspection, operation, and maintenance instruc -
tions.
9. Function Check – Once the Walk-Around Inspection is com -
plete, perform a functional check of all systems in an area
free of overhead and ground level obstructions. Refer to Sec -
tion 3 for more specific instructions on the operation of each
function.
10. Platform Gate – Keep gate and surrounding area clean and
unobstructed. Ensure the gate closes properly and is not
bent or damaged. Keep gate closed at all times except when
entering/exiting the platform and loading/unloading mate -
rials.
11. Lanyard Attach Points – JLG Industries, Inc. recommends
personnel in the platform wear a full body harness with a
lanyard attached to an authorized lanyard attach point.
IF THE MACHINE DOES NOT OPERATE PROPERLY, TURN OFF THE MACHINE IMMEDI -
ATELY! REPORT THE PROBLEM TO THE PROPER MAINTENANCE PERSONNEL. DO NOT
OPERATE THE MACHINE UNTIL IT IS DECLARED SAFE FOR OPERATION.
.
Parent Metal Crack Weld Crack