Oshkosh Corporation JLG R2632, Operation And Safety Manual

Page: 30 / 108

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
2-8
31215932
2.5 FUNCTION CHECK
Perform the Function Check as follows:
1.
At the
Ground Control Panel
with no load in the platform:
a. Ensure the key selector switch and platform lift switch
operate properly.
b. Ensure all machine functions are disabled when the
Emergency Stop Button is depressed.
c. With the platform raised a few feet (1 m), ensure the
manual descent control (T-handle located at rear of
machine next to the battery charger) lowers the plat -
form (refer to Section 3.8).
d. Verify the Pothole Protection bars are fully lowered
when the platform is raised.
2.
From the
Platform Control Console
:
a. Ensure the control console is firmly secured in the
proper location.
b. Ensure all guards protecting switches are in place.
c.
Operate all switch functions, drive/lift mode select
switch, and horn button.
d.
Operate all platform joystick functions to ensure proper
operation of drive, lift, steer, and enable trigger switch.
e.
Ensure all machine functions stop when function con -
trol is released or when joystick trigger is released.
f.
Ensure all machine functions are disabled when the
platform Emergency Stop Button is depressed.
Platform Elevated - Pothole Bars Fully Lowered
Platform Fully Lowered - Pothole Bars Raised