SECTION 4 - MACHINE OPERATION
31215054
4-27
1.
Place the boom in the stowed position with the turntable
locked.
2.
Remove all loose items from the machine.
3.
Secure the chassis using straps or chains of adequate
strength and attached to the designated tie down points.
4.
Ensure the platform is lowered so the wear pad on the
bottom rests on the surface of the transportation vehicle.
5.
Secure through the tie downs on the boom using straps or
chains of adequate strength.
4.16 STOWING THE JIB FOR TRANSPORT
1.
Place the boom in the stowed position with the axles
retracted.
2.
Hold the Jib Swing control switch to the right until the plat
-
form will no longer swing.
NOTE:
The Jib Swing function is not operable when the Capacity Select
control is in the 1000 lb (
454 kg for ANSI markets and 450 kg for
CE and Australia markets
) position.
NOTE:
Automatic platform leveling is disabled when stowing the jib.
3.
Push and hold the Jib Stow control switch until the jib and
platform are in the stowed position under the boom.
OAC014470
Summary of Contents for JLG 1200SJP
