SECTION 3 - MACHINE CONTROLS AND INDICATORS
31215054
3-17
operate again at creep speed, allowing the operator to move
the platform away from the obstacle that caused the shut
-
down situation.
For machines equipped with both SkyGuard and SkySense:
The switch operates like the SkyGuard
override switch as described above.
The switch also enables the functions
cut out by the SkySense system to
operate again at creep speed, allowing the operator to move
the platform closer to the obstacle that caused the shut
-
down situation if desired.
17.
Jib Swing
This switch allows the operator to rotate the jib to the left or
right.
18.
Soft Touch/SkyGuard
Indicates the Soft Touch bumper is against an object or the
SkyGuard sensor has been activated. All controls are cut out
until the override button is pushed. For Soft Touch, controls
are then active in the Creep Mode or for SkyGuard, controls
will work normally.
19.
Platform Rotate
Allows the operator to rotate the platform to
the left or right.
20.
Jib Stow
Allows the jib to be returned to the stowed
position for transport and also taken out of
the transport position for machine usage.
This control operates both jib swing and the
jib lock pin in a coordinated manner.
21.
Function Speed Control
This control knob affects the speed of
Telescope, Jib Swing, Jib Lift, and Plat
-
form Rotate functions.
NOTE:
During platform rotation, a speed differ
-
ence may not be noticeable to the operator.
Turning the knob all the way counterclockwise until it clicks
puts the machine into Creep Mode. Creep Mode puts the
functions listed above, as well as the Drive/Steer and Main
Lift/Swing functions into the slowest speed setting.
Summary of Contents for JLG 1200SJP
