![background image](http://html1.mh-extra.com/html/oshkosh-corporation/jlg-1200sjp/jlg-1200sjp_operation-and-safety-manual_1655740068.webp)
SECTION 4 - MACHINE OPERATION
4-6
31215054
2.
Pull the Power/Emergency Stop switch out.
3.
Push the Engine Start switch until engine
starts.
ALLOW ENGINE TO WARM-UP FOR A FEW MINUTES AT LOW SPEED BEFORE APPLYING
ANY LOAD.
4.
After engine has had sufficient time to warm up, shut engine
off.
5.
Turn Platform/Ground Select switch to the
Platform position.
6.
From Ground Control Console, pull Power/
Emergency Stop switch out.
7.
From the Platform Control Console, pull the
Power/Emergency Stop switch out.
8.
Push the Engine Start switch until engine
starts.
NOTE:
Footswitch must be in released (up) position before starter will
operate. If starter operates with footswitch in the depressed posi
-
tion, DO NOT OPERATE MACHINE.
Summary of Contents for JLG 1200SJP
