Oshkosh Corporation JLG 1200SJP, Operation And Safety Manual

Page: 116 / 168

SECTION 6 - ACCESSORIES
6-6
31215054
Accessory Ratings
Output
Engine Speed of 1800 rpm +/- 10%.
SkyPower 7.5 kW Specifications:
• 3-phase: 240 V, 60 Hz, 7.5 kW (Peak: 8.5 kW)
• 1-phase: 240 V/120 V, 60 Hz, 6 kW (Peak: 6 kW)
Preparation and Inspection
• Connect ground clamp to metal being cut.
• Ensure there is a good ground connection.
Operation
Start the engine, turn on the generator, then turn on the plasma
cutter.
See the Miller Plasma Cutter Owner’s Manual (PN 3128420) for
more information.
Spec. Rated Output
Amperes Input @
Rated Output, 60
Hz, 1-Phase
kVa/kW Plasma Gas
Plasma Gas Flow/
Pressure
Rated Cutting
Capacity @ 10 IPM
Max. OCV
120 Volts ±10%
(20 A)
27 A @ 91 VDC @ 20%
Duty Cycle
28.8 max;
0.30 *
3.4 kVa
3.2 kW
Air or Nitrogen Only
@ 90 - 120 psi
(621 - 827 kPa)
4.5 cfm
(129 L/Min)
@ 60 psi
(414 kPa)
3/8 in
(10 mm)
400 VDC
120 Volts ±10%
(15 A)
20 A @ 88 VDC @ 35%
Duty Cycle
20.6 max;
0.30 *
2.5 kVa
2.3 kW
240 Volts ±10%
(27 A)
27 A @ 91 VDC @ 35%
Duty Cycle
13.9 max;
0.13 *
3.3 kVa
3.0 kW
* While idling.