5-376-000094
REV. 3 - 03/10
Section II: Operation
Page 45
CHAIN HOOK ADAPTERS
1. Slide the chain hook adapters
onto the crossbar.
2. Install the retaining pin from the
back side of the crossbar
through the adapter and cross-
bar and install the hair pin.
3. Extend the under lift boom up to
the casualty vehicle so that the
chain hook adapters are in the
proper position for lifting.
4. Attach hook-up chains to the
casualty vehicle. Fasten the
chains in the hooks on the end
of the adapters and safety wrap
the chain around the bottom of
the hook as shown. Secure the
remaining chain.
5. Raise the boom to lift the
casualty vehicle slightly. At the
same time make sure that you
are not going to damage any
components.
Ea
st
ern
W
re
cke
r Sa
le
s
In
c