![background image](http://html1.mh-extra.com/html/oshkosh-corporation/jerr-dan-hdr-70-85-530/jerr-dan-hdr-70-85-530_operation-and-maintenance-manual_1655760042.webp)
5-376-000094
REV. 3 - 03/10
Section II: Operation
Page 34
5. Adjust the electronic or manual throttle control to elevate the engine
speed to approximately 1000-1200 R.P.M. of P.T.O. output shaft speed
for optimum performance.
CAUTION:
Never exceed 1200 R.P.M. When your hook up is complete, reset
the engine idle to normal.
6. Confirm the recovery vehicle’s position in relation to the casualty vehicle
to be towed. Nine (9) ft. is recommended. Reposition the recovery vehicle
if necessary.
Be sure the casualty vehicle is not in gear or park.
Keep the brake set.
7. Using the tilt fuction, unfold the
under lift boom down until it is in
the horizontal position.
8. Lower the under lift boom to
about one (1) in. from the ground
and swing the crossbar parallel
to the casualty vehicle.
Ea
st
ern
W
re
cke
r Sa
le
s
In
c