5-376-000094
REV. 3 - 03/10
Section II: Operation
Page 39
CAUTION:
Always follow the chassis manufacturer's recommended procedures
for towing. Remove drive lines and drive shafts as directed. Many
vehicles can be severely damaged unless these components are
removed prior to towing.
11. Be sure to maintain sufficient ground clearances with the bottom of the
casualty vehicle.
12. Attach the safety chains and
auxiliary towing lights.
13. Hook-up and connect air and
braking systems.
14. If the remote hand controller was
used, turn the CONTROL switch
“OFF”. (Switch is located on
panel on the floor.)
WARNING:
Never fold the boom up into the
storage position without
removing the towing adapters
from the crossbar receivers.
CAUTION:
The use of secondary tie-down chains is recommended. Install the
tie-down chains between the axle or substantial chassis component
and the towbar.
Ea
st
ern
W
re
cke
r Sa
le
s
In
c