![background image](http://html1.mh-extra.com/html/oshkosh-corporation/jerr-dan-hdr-70-85-530/jerr-dan-hdr-70-85-530_operation-and-maintenance-manual_1655760050.webp)
5-376-000094
REV. 3 - 03/10
Section II: Operation
Page 42
13. If the remote hand controller was
used, turn the CONTROL switch
“OFF”. (Switch is located on
panel on the floor.)
WARNING:
Never fold the boom up into the
storage position without
removing the towing adapters
from the crossbar receivers.
CHAIN FORKS (OPTIONAL)
1. Insert the chain forks into the
receivers on the crossbar.
2. Extend the under lift boom up to
the casualty vehicle so that the
chain forks are in the proper
position for lifting.
3. Attach the hook-up chains to the
casualty vehicle. Hook the
chains through the chain forks
and secure any extra chain to
the hooks on the lift receivers.
The use of wood blocks and
rubber mats may be required to
protect the casualty vehicle.
4. Raise the boom to lift the
casualty vehicle slightly. At the
same time make sure that you
are not going to damage any
components.
Ea
st
ern
W
re
cke
r Sa
le
s
In
c