CAS40P 40 CFM / 100 PSIG
SECTION 6: MAINTENANCE
PAGE - 27
®
An Oshkosh Corporation Company
maintenance task more frequently under harsher
conditions.
IMT provides a routine maintenance parts list in
Sec-
tion 8
,
Table 8A
. Should a non-routine part need
replacement or servicing, peruse the various parts
list illustrations in
Section 8
to help determine the
exact part and part number in question. Our parts
and service departments are ready to assist in identi-
fying and/or replacing non-routine parts.
For assistance in obtaining routine maintenance or
replacement parts, consult
Section 8.1, Parts
Ordering Procedure
, and
Table 8A: Recom-
mended Spare Parts List.
6.3 REPLACEMENT PARTS
Replacement parts should be purchased through
your local IMT representative or where the compres-
sor system was purchased. If, for any reason, parts
are not available in this manner, they can be pur-
chased through IMT directly.
Iowa Mold Tooling Co., Inc.
500 Highway 18 West
Garner, Iowa 50438
Phone: 641.923.3711
Fax: 641.923.2424
6.4 PARTS REPLACEMENT AND
ADJUSTMENT PROCEDURES
NOTE
If additional spare parts are being stored
for future use, make certain that they are
stored in proper containers that allow for
protection against contamination, and
kept in a clean area of moderate
temperature reading. For information on
storing the machine package for periods
of non-use, consult
Section 6.5, Long
Term Storage
.
System Component Group
Manual
Section
Parts Replacement and Adjustment Procedures
6.4
Removing Panels for Machine Maintenance Access
6.4.1
Continued on next page
NOTE
Keep the equipment clean when
performing maintenance or service
actions. Cover openings to prevent
contamination.
NOTE
Wear appropriate protective (eye and
hearing protection) equipment and
clothing when operating or maintaining
this equipment. DO NOT wear jewelry,
loose clothing; and long hair should be
restrained with headband or safety hat.
NOTE
When using compressed air to clean the
components, the nozzle pressure should
not exceed 15 psig.
WARNING
DO NOT use flammable solvents or
cleaners for cleaning the compressor or
its parts.
WARNING
DO NOT use tools, hoses, or equipment
that have maximum ratings below that of
this compressor.
Manual #99905382 Rev 02
(JUNE 2018)
Summary of Contents for IMT CAS40P
Page 119: ...BLANK PAGE...
