CAS40P 40 CFM / 100 PSIG
SECTION 2: DESCRIPTION
PAGE - 9
®
An Oshkosh Corporation Company
2.2.7 MAIN FRAME AND ENCLOSURE
Refer to
Figure 2-5
. The steel main frame is provided
with bolt down holes.
The enclosure panels, which are attached to the main
frame and frame supports, are made from steel and are
powder coated to provide a durable finish. The top panel
is hinged for easy access to oil fill and other routine
maintenance items.
The main enclosure housing provides overall protection
for the various unit assemblies. The cooler assembly
enclosure [
B
], is located on the opposite side from the
connection port panel of the package [
D
]. The service air
outlet [
D
1
], compressor drain hose [
D
2
], 6-pin Deutch
connection [
D
3
] and hydraulic hose line connections [
D
4
and
D
5
] are found on the connection port panel.
Compressor oil level can be checked from the outside of
the enclosure (
Figure 2-3
, [
D
]), and filled via a fill port
located at the inside left rear corner facing from the
(opened) hinged-access roof panel (consult
Section
KEY
DESCRIPTION
KEY
DESCRIPTION
A
MAIN ENCLOSURE
D
2
COMPRESSOR DRAIN HOSE (on frame)
B
COOLER ASSEMBLY ENCLOSURE
D
3
6-PIN DEUTCH CONNECTION
C
MAIN FRAME
D
4
HYDRAULIC SUPPLY
D
CONNECTION-SIDE PANEL
D
5
HYDRAULIC RETURN
D
1
SERVICE AIR OUT
E
FRAME: MOUNTING HOLE SLOTS
Figure 2-5: Main Frame, Mounting and Enclosure
D1
B
E
E
A
D
D2 D3
D5
C
D4
WARNING
DO NOT operate machine with the roof
panel open or removed.
Manual #99905382 Rev 02
(JUNE 2018)
Summary of Contents for IMT CAS40P
Page 119: ...BLANK PAGE...
