CAS40P 40 CFM / 100 PSIG
SECTION 6: MAINTENANCE
PAGE - 35
®
An Oshkosh Corporation Company
should be replaced approximately every 500 operat-
ing hours or sooner, depending upon inspection.
Plugged suction filters can cause high oil consump-
tion and reduced delivery quantity! Change the filter
more often when running in dusty conditions.
NOTE
If one of the air filters is in need of
replacement, replace both air filters at
the same time.
System Component Group
Manual
Section
Air Filter Maintenance
6.4.4
Inspecting the Air Filter(s)
6.4.4.1
Replacing the Air Filter(s)
6.4.4.2
KEY
DESCRIPTION
KEY
DESCRIPTION
A
SIGHT GLASS
F
1/4 FULL
B
COMPRESSOR OIL FILL PORT
G
OPTIMAL OIL LEVEL RANGE
C
SIGHT GLASS LEVEL READING ACCESS
H
COMPRESSOR OIL DRAIN HOSE (1/2”)
D
3/4 FULL
J
HOSE CLAMP
E
1/2 FULL
K
OIL DRAIN HOSE CAP (1/2”)
For oil maintenance, order replacement oil no.
89086220
(sold in one [1] gallon containers).
Figure 6-4: Compressor Oil Fill and Oil Change
E
D
F
G
C
B
A
K
J
H
WARNING
Before performing maintenance:
Shut down machine, relieve all system
pressure and lock out all power, as per
the Safety Section of this manual. If
machine is hot, allow package to cool
before removing any panel.
NOTE THAT THE SYSTEM CAN BE
STARTED REMOTELY:
Always clearly tag the start-up
instrumentation against accidental
system start-ups during maintenance.
Manual #99905382 Rev 02
(JUNE 2018)
Summary of Contents for IMT CAS40P
Page 119: ...BLANK PAGE...
