Installation and operating manual for WATERFRIEND -Chlorine MRD-3 Page 33
Alarm settings
For each of the alarm conditions you can set individually using this function, what type of alarm messages to
be generated respectively.
Procedure:
Press the
key
1. Select Service functions
2. Select Alarm set
3. Select the appropriate alarm
For each alarm type you can select whether an audible alarm is generated (
), an e-mail will be sent (
), or
the centralized alarm contact is activated ( ).
Restore factory settings
With this function, all user programmable parameters are reset to the factory settings.
This function should only be used by a professional, and is only accessible in Expert Mode.
Procedure:
Press the
key
1. Select Service functions
2. Select Factory settings
3. Answer YES or NO to the confirmation query.
Setting for network operation
For operation in the network (LAN or Internet), various parameters need to be set.
Using the
-communication server
For a simplified access to the device from the Internet the
–communication server can be used.
Procedure:
Press the
key
1. Select Service functions
2. Press the key
in the key bar
3. Select network settings
4. Activate or deactivate the function Internet connection via
communication server.
Factory setting: Internet connection via communication server active
