No power supply
LED not lit
No power supply
The LED is not lit and no motor sounds are audible when the door is opened.
Display text of the glass display
No display text present�
Possible cause
• The LED cable is defective
• The compression fitting on the LED is not secured correctly
• Short-circuit
• Power failure
Correction
First check the compression fittings of the LED cable on the control� When the
compression fitting of the LED on the control is secured correctly, the cable or the LED
is defective� Please inform your stove fitter in order to have the LED replaced� Measures
for improvement and avoidance should be taken in order to prevent the damage from
occurring again� Please consult us�
Door open, although the door is closed
LED lit continuously
Door open
Display text of the glass display
TEMP1 45°C
Door open – Register open – (Temp2 = 30 °C) – Door open – Register open
Possible causes
• No earth contact on the door contact or door sensor�
• Screwed connection on the control is loose�
• Cable connected incorrectly�
