IG-258-EN, version 02; 16/11/2018
16
Unit configuration
General Instructions
ekor
.bat-200
6.1.1. Communications parameters
Name
Description
Format
Information of the unit
Installation
20 char
Sigrid Code
20 char
Model
20 char
Type
Type of equipment
20 char
Manufacturer
Equipment manufacturer
20 char
Serial number
Serial number
20 char
MAC
20 char
Config version
Configuration version
20 char
Config date
Configuration date
20 char
IP ADDRESSES
DHCP
IP assignment in access port - YES: dynamic IP assignment by DHCP -
NO: assignment through fixed parameters in the unit
0:NO/1:YES
IP_REMOTA
Remote IP address
20 char
Subnet mask
Subnet mask of possible "T" values
20 char
Gateway
Gateway of possible "T" values
20 char
IP_LOCAL
Remote IP address
20 char
Subnet mask
Subnet mask of possible "T" values
20 char
SNTP Clock addresses
IP
Connexion IP for the SNTP protocol
20 char
Gateway
Gateway for the SNTP protocol
SI_TFALL
Time without synchronising in order to consider the internal clock out-of-sync
min
T_PETSINCRO
Server polling period
Seg
T_ESPSINCRO
Time the synchronisation server waits for a response in the event of unicast request.
min
RETRY t
Time between re-attempts in the servers: DHCP, LDAP, NTP, SNMP
seg
RETRY n
Number of attempts for each of the servers: LDAP, NTP, SNMP
units
LDAP Parameters
IP_LDAP
Connexion IP for the LDAP protocol
20 char
Gateway
Gateway for the LDAP protocol
20 char
PORT_LDAP
Gateway for the LDAP protocol
Category 1
Category 2
Category 3
Category 4
Category 5
Category 6
Category 7
Category 8
LDAP tact
Session time
min
SNTP Clock addresses
IP_SNMP
Connexion IP for the SNMP protocol
20 char
Gateway
Gateway for the SNMP protocol
20 char
Rcom
Reading community
8 char
Trap_com
Traps community
8 char
Trap_period
Time between traps
min
Wcom
Writing community
8 char
Table 6.2.
Communication parameters
