![Orion Technology OR-iNVR08 User Manual Download Page 18](http://html1.mh-extra.com/html/orion-technology/or-invr08/or-invr08_user-manual_1653292018.webp)
14
14
14
14
NOTE
All changes will be applied when click ‘Ok’ button. You must click ‘Ok’ button when you
leave this page.
3.3 Network
It is for Network setup for OR-iNVR.
After finish the setting, IP address of OR-iNVR will be changed. Therefore, user needs to connect through the
new IP address.
1. Network Type:
A. Select either Static IP or DHCP for dynamic IP.
B. Default is “DHCP” for easy connection.
C. However, IP address of OR-iNVR can be changed by network condition, it is recommended to
use fixed IP(Static IP).
2. IP Address
Enter IP adress information of this system when you need. Generally all these information is entered
when you search this by IP finder utility.
*for more details about IP information, ask your network administrator.
3. WEB port:
A. Setup WEB port for connecting to OR-iNVR through browser. Default is ‘80’.(changeable.)
Followings are the examples of how to connect.
i.
In case of 80 : http://{IP address}
ii.
In case of 8088 : http://{IP address}:8088
*In order to connect to OR-iNVR from the outside, port forwarding should be required.
4. Base / Mobile Port:
A. Setup port for transmitting images from OR-iNVR to remote software.
B. Default is ‘9010’ and it can be changed.
Once this has changed, port setup at the remote software should be changed.
5. MAC Address: Displays MAC address.
6. Event Port:
Set port for event transmission and this uses fixed port 8003.
Receiving event from IP camera may not be available depending on the protocol of IP camera.
Receiving event from OR-iNVR is available only at the remote software that is provided with
OR-iNVR.
7. RTSP port:
Default is “554” and it can be changed.
It supports connection with the other ONVIF™ based software and the RTSP port between
OR-iNVR and the software should be the same.
8. DDNS Use:
Check whether you use DDNS or not.
A. DDNS Type : Select DDNS type.
B. DDNS port : Set port to connect to DDNS. Port number which is designated by DDNS service
provider can be used.
C. DDNS Domain : Set the subdomain to use DDNS. In some case, you need to register in
advance.