9999
The first step is for Network Setup, Date & Time Configuration and HDD Information & Configuration.
User can setup those items step by step.
All the setting value changes including HDD format are applied after finish all setting steps.
User can search and register ONVIF™ based IP cameras in the second step.
Click “Search” button to search ONVIF™ based IP cameras which are in the same network with OR-iNVR.
Following is the procedure of registering searched devices.
1. Select channel and assign selected IP camera.
2. Enter RTSP Port, HTTP Port & Stream Name.
In case of the device that allows connection only for the registered users, check “Authentication” and
enter User ID & Password.
3. In case of the device that supports detail information response function, user can get information of
RTSP Port, HTTP Port & Stream Name by clicking “Get Detail” button. However, “Get Detail” cannot
get Authentication information and user needs to enter them manually.
When registration is finished, click “Next Step” button to move to next page.
NOTE
It would take time to get information with. ‘Get Detail’.
It’s device dependent. Some camera models and others would requires 10 seconds around.
