8888
2.
Initial Setup(Quick Setup)
When the power is supplied to OR-iNVR, boot up process is started automatically.
(Boot up process takes time depending on the situation. However, in general, it is finished within 3 minutes.)
OR-iNVR supports Java™ based Web browser setup. User can connect to OR-iNVR and control & setup it
through WEB browser.
If there is DHCP server in the network and OR-iNVR is connected to the network, IP address is automatically
assigned to OR-iNVR after booting.
NOTE
Assigned IP can be checked with DHCP server or IP Installer.
At the first connection to OR-iNVR, it goes to Quick Setup mode.
In the Quick Setup mode, network setting & camera connection setting is available.
When you connect to OR-iNVR, Log-in screen is shown.
Default User
ID is “admin” and Password is “1234”.
After log-in, it requires the process for calling Java™ program. During that time, Java™ logo will be shown on
the screen. And then, the Quick Setup screen will be shown.
