RDS-3086/3166G User Manual
ORing Industrial Networking Corp
30
Performance
Throughput
: This mode is optimized for the highest
transmission speed.
Latency
: This mode is optimized for the shortest response time.
4.2.2.2 Port Profile
Label
Description
Local TCP Port
Indicates the TCP port the device uses to listen to connections,
and that other devices must use to contact the device. To avoid
conflicts with well-known TCP ports, the default is set to
4000
.
Command Port
Indicates the listen TCP port for IP-Serial Lib commands from the
host. In order to prevent a TCP port conflict with other
applications, the user can set the Command port to another port
if needed.
Flush Data Buffer After
The received data will be queuing in the buffer until all the
delimiters are matched. When the buffer is full (4K Bytes) or
after “Flush Data Buffer After” times out the data will also be
sent. You can set the time from
0
to
65535
seconds.
Delimiter
For advanced data packing options, you can specify
delimiters for Serial to Ethernet and / or Ethernet to Serial
communications. You can define max. 4 delimiters (00~FF,
Hex) for each way. The data will be hold until the delimiters
are received or the option
Flush Serial to Ethernet data
buffer
times out.
0
means disable. Factory default is
0
.
4.2.2.3 Service Mode
Virtual COM Mode
