RDS-3086/3166G User Manual
ORing Industrial Networking Corp
34
Label
Description
Listen Port
Allows the user to set a new TCP port number to listen on rather
than the default value of the device
Host Start/End IP
If there are more than one destination hosts, specify the IP
address range by inputting a value in
Host Start
/
End IP
. You
can also auto scan the sending port number of the device
Send Port
Set the send port number.
Modbus RTU Slave Mode
The Modbus RTU Slave mode allows communications between a host computer and a slave
device. After a host computer sends a command, the slave device processes the command
and returns a response to the host computer. This process is repeated, allowing the host
computer to monitor and control controller operation.
Label
Description
TCP Server Port
Indicates the port used for the Modbus/TCP communication
Max Connection
The total number of remote TCP/IP clients allowed to connect
to this server.
