Oracle Sun Fire X4240, Service Manual

Page: 94 / 190

4-32 Sun Fire X4240 Server Service Manual • September 2010
4.7 Servicetool FRU Update Procedures
The following topics are covered:
■
Section 4.7.1, “Updating FRU Product Information Using ServiceTool” on
page 4-32
■
Section 4.7.2, “Restoring Product Information From the FRUID PROM” on
page 4-34
■
Section 4.7.3, “Changing Product Information on the Motherboard Using a File”
on page 4-35
Caution – The SunService account is for the use of Sun service representatives only.
Do not use the SunService account unless you are instructed to do so in a procedure
developed by Sun Microsystems.
Note – If your system is running ILOM 3.x, then you must re-enable your
SunService account.
Note – Before beginning these procedures, obtain Service/Escalation passwords
from the Customer Support Center.
4.7.1 Updating FRU Product Information Using
ServiceTool
1. Use SSH to log into the SunService account. The default password is
changeme
.
#
ssh
<SP IP address>
-l sunservice
# <SP IP Address>'s password: changeme