Oracle SPARC T5-2 Service Manual Download Page 35

Page: 35 / 186

Related Information

■

“Diagnostics Process” on page 32

■

“Log In to Oracle ILOM (Service)” on page 35

■

“Oracle ILOM Service-Related Tools” on page 35

Log In to Oracle ILOM (Service)

At the terminal prompt, type:

ssh root@

IP-address

Password:

password

Waiting for daemons to initialize...
Daemons ready
Oracle (R) Integrated Lights Out Manager
Version 3.1.x
Copyright (c) 2013, Oracle and/or its affiliates, Inc. All rights reserved.
->

Related Information

■

“Diagnostics Process” on page 32

■

“Tool Availability” on page 34

■

“Oracle ILOM Service-Related Tools” on page 35

Oracle ILOM Service-Related Tools

You can use these Oracle ILOM CLI commands when performing service-related tasks.

Oracle ILOM Command

Description

help

[

command

]

Displays a list of all available Oracle ILOM commands

with syntax and descriptions. Specifying a command name

as an option displays help for that command.

set

/HOST

send_break_action=break

Takes the host server from the OS to either

kmdb

OpenBoot prompt (equivalent to a Stop-A), depending on

the mode in which the Oracle Solaris OS was booted.

start

/HOST/console

Connects to the host.

show

/HOST/console/history

Displays the contents of the host's console buffer.

Detecting and Managing Faults

Summary of Contents for SPARC T5-2



























































































































































































Search results

Summary of Contents for SPARC T5-2

Reviews:

Related manuals for SPARC T5-2

Brands by name

Popular brands

Oracle SPARC T5-2, Service Manual

Search results

Summary of Contents for SPARC T5-2

Reviews:

Related manuals for SPARC T5-2

Brands by name

Popular brands