Oracle ES1-24 Product Notes Download Page 9

Page: 9 / 32

Late-Breaking Information

These product notes provide important late-breaking information and instructions for upgrading

the firmware to the latest version.

■

“Documentation Reading Order” on page 9

■

“New Features” on page 10

■

“Upgrading the Switch Firmware” on page 12

■

“Configure 1 Gbps Mode on SFP+ Interfaces” on page 18

■

“Configure Speed on the 10GBASE-T Interfaces” on page 18

■

“Fine Tune the VLAN Setup” on page 19

■

“Configuring In-Band Management” on page 23

■

“Managing SEFOS Configurations” on page 25

■

“Configuring ” on page 27

■

“Known Issues” on page 29

Documentation Reading Order

All of the switch product documentation and related documentation can be found at:

http://

www.oracle.com/goto/es1-24/docs

Read the documentation in this order.

Step

Document Title or Type

Information Provided

Oracle Switch ES1-24 Product Notes

Late-breaking information, supported configurations, and

system limitations.

README files

Located in the download package, lists of corrected issues

and special instructions for applying patches.

Oracle Switch ES1-24 Configuration Guide

Software configuration instructions.

Oracle Switch ES1-24 Service Manual

Removal and installation of replaceable parts.

Administration Guides

Reference and administration information for the software.

Late-Breaking Information

Summary of Contents for ES1-24
































Search results

Summary of Contents for ES1-24

Reviews:

Related manuals for ES1-24

Brands by name

Popular brands

Oracle ES1-24, Product Notes

Search results

Summary of Contents for ES1-24

Reviews:

Related manuals for ES1-24

Brands by name

Popular brands