Configure Settings
Configure Settings
Before You Begin
Note -
Before you configure settings for use with SEFOS, ensure that the User
Management (
u
) role is enabled. Also ensure that you have collected all relevant information
about your environment, then configure the appropriate settings from Oracle ILOM
to enable authentication using .
1.
Log in to the Oracle ILOM CLI.
2.
Navigate to the
directory.
->
cd /SP/clients/
3.
Use the
set
command to configure the properties.
->
set/SP/clients/ state=enabled address=10.12.235.32
Set 'state' to 'enabled'
Set 'address' to '10.12.235.32'
4.
Use the
show
command to view the properties.
->
show /SP/clients/
/SP/clients/
Targets:
Properties:
address = 10.12.235.32
defaultrole = o
fs_privilege = 1
port = 49
protocol = ip
secret = *****
service = ppp
state = enabled
Commands:
cd
set
show
28
Oracle Switch ES1-24 Product Notes • November 2016
