Fine Tune the VLAN Setup
SEFOS#
show vlan port config port extreme-ethernet 0/3
Vlan Port configuration table
-------------------------------
Port Ex0/3
Port Vlan ID : 1
Port Acceptable Frame Type : Admit All
Port Ingress Filtering : Disabled
Port Mode : Hybrid
Port Gvrp Status : Enabled
Port Gmrp Status : Enabled
Port Gvrp Failed Registrations : 0
Gvrp last pdu origin : 00:00:00:00:00:00
Port Restricted Vlan Registration : Disabled
Port Restricted Group Registration : Disabled
Mac Based Support : Disabled
Subnet Based Support : Disabled
Port-and-Protocol Based Support : Enabled
Default Priority : 0
Filtering Utility Criteria : Default
Port Protected Status : Disabled
-------------------------------------------------------
3.
Reconfigure the port.
For example, to reconfigure the 10 GbE port
Ex0/3
as a tagged port in
vlan 3
and permit only
tagged frames:
SEFOS#
config terminal
SEFOS(config)#
vlan 3
SEFOS(config-vlan)#
port extreme-ethernet 0/3
SEFOS(config-vlan)#
exit
SEFOS(config)#
interface extreme-ethernet 0/3
SEFOS(config-if)#
switchport ingress-filter
SEFOS(config-if)#
switchport acceptable-frame-type tagged
SEFOS(config-if)#
end
SEFOS#
show vlan port config port extreme-ethernet 0/3
Vlan Port configuration table
-------------------------------
Port Ex0/3
Port Vlan ID : 1
Port Acceptable Frame Type :
Admit Only Vlan Tagged
Port Ingress Filtering :
Enabled
Port Mode : Hybrid
Port Gvrp Status : Enabled
20
Oracle Switch ES1-24 Product Notes • November 2016
