Restore the Configuration
/SP/config
->
set passphrase=abc123
Set 'passphrase' to 'abc123'
Note -
The passphrase you provide must not contain the @, ‘ (apostrophe), " (quotes), or \ (back
slash) symbols.
2.
Ensure that you have proper login credentials for the server where the
configuration is to be backed up.
3.
Back up the configuration to a remote server.
->
set dump_uri=ftp://username:[email protected]/tmp/mySwitchConfig.bak
Dump successful
Restore the Configuration
Note -
The administrator must always reset the SNMP engine ID prior to doing the backup
or restore operation. Because of CR 6934622, the SNMP engine ID (even when previously
set) is not visible after a reset of the system, and the administrator must record and set the ID
explicitly.
1.
Configure the network settings on the Oracle ILOM network management
interface to communicate with the backup server.
->
cd /SP/network
2.
Set the passphrase to the same value that was used for backup.
See
“Include the SEFOS Configuration in Backups” on page 25
->
cd /SP/config
/SP/config
->
set passphrase=abc123
Set 'passphrase' to 'abc123'
3.
Restore the configuration from the server.
->
set load_uri=ftp://username:[email protected]/tmp/mySwitchConfig.bak
Load successful.
26
Oracle Switch ES1-24 Product Notes • November 2016
