Include the SEFOS Configuration in Backups
macaddress = 00:
xx
:
xx
:
xx
:
xx
:
xx
pendingipaddress = xx.xxx.xxx.xx
pendingipdiscovery = static
pendingipgateway = xx.xxx.xxx.x
pendingipnetmask = 255.255.255.0
state = enabled
...
->
3.
(Optional) Disable the out-of-band network if needed.
->
cd /SP/network
/SP/network
->
set state=disabled
Set 'state' to 'disabled'
Managing SEFOS Configurations
These tasks assist in managing SEFOS configurations:
■
“Include the SEFOS Configuration in Backups” on page 25
■
“Restore the Configuration” on page 26
Include the SEFOS Configuration in Backups
By default, only the Oracle ILOM configuration is backed up when the backup feature is used.
Complete the following tasks to include the SEFOS configuration in this backup.
1.
Before backing up your SEFOS configuration using the Oracle ILOM backup
feature, complete the following steps.
a.
Save the switch configuration.
SEFOS#
write startup-config
Building configuration ...
[OK]
b.
Set a passphrase.
->
cd /SP/config
Late-Breaking Information
25
