Oracle Application Server 10g, Installation Manual

Page: 29 / 258

Software Requirements
Requirements 2-5
2.2.1 Installing from the Console or X Windows
If you are performing the installation from the console or X Windows, then add the
following line to the
/etc/pam.d/xdm
file:
session required pam_limits.so
2.2.2 Tips for Reducing Memory Usage
If you need to reduce memory consumption:
■
Configure only the components that you need.
■
After installation, start up only the components that you need. See the Oracle
Application Server Administrator’s Guide for details.
■
Run Application Server Control only when you need to administer an instance. In
most cases, you do not need Application Server Control running all the time.
If you are running multiple Oracle Application Server instances on one computer,
each Application Server Control can consume a lot of memory. Running
Application Server Control only when you need it can free up memory for other
components.
■
Configure Application Server Control so that it can manage multiple instances. See
the
Oracle Application Server Administrator’s Guide for details.
2.3 Software Requirements
Check that the software listed in Table 2–3 is installed on the system. The procedure
that follows the table describes how to ensure the correct software is installed on the
system.
Note:
Oracle Application Server 10 g (10.1.4.0.1) is certified with the
following Operating System specific software. For the most current list
of supported Operating System specific software, for example JDK
version, Operating System version, check Oracle
MetaLink
(
http://metalink.oracle.com
).
Table 2–3 Software Requirements for HP-UX 11i version 2 Itanium Systems
Item Requirement
Operating
System HP-UX 11i Version 2 (11.23) Itanium or higher