manualshive.com logo in svg

Oracle Application Server 10g, Installation Manual

Share
Download
Oracle Application Server 10g Installation Manual Download Page 183

Post-Installation Steps

Installing in High Availability Environments: OracleAS Cluster (Identity Management)

9-25

9.7.2 Changing the Ports for Oracle Internet Directory

Although it is recommended that the ports for the LDAP virtual server and the Oracle 
Internet Directory are the same, it is possible for the ports to be different.

See the section "Changing Oracle Internet Directory Ports" in the 

Oracle Application 

Server Administrator’s Guide

 for details on changing the Oracle Internet Directory ports.

9.7.3 Update targets.xml (Case 2 only)

The following configuration steps are needed only in the installation scenario 
described in 

Section 9.4.2, "Case 2: Client ---[HTTPS]---> Load Balancer ---[HTTPS]---> 

Oracle HTTP Server"

.

In this case the oracle_sso_server entry in the 

targets.xml

 file, on each physical host 

of the cluster, must be reconfigured to monitor the local SSL port.

Perform the following steps to update 

targets.xml

 on each node of the cluster:

1.

Back up the 

targets.xml

 file: 

cp ORACLE_HOME/sysman/emd/targets.xml 

ORACLE_HOME/sysman/emd/targets.xml.BACKUP

2.

Open the file and find the oracle_sso_server target type. Within this target entry, 
locate and edit the following two attributes:

■

HTTPPort - the server SSL port number

■

HTTPProtocol - the server protocol, which in this case is 

HTTPS

For example, you could update the two attributes this way:

<Property NAME="HTTPPort" VALUE="4443"/>

<Property NAME="HTTPProtocol" VALUE="HTTPS"/>

3.

Save and close the file.

4.

Reload the OracleAS console:

ORACLE_HOME/bin/emctl reload

Note:

When choosing a multicast address, ensure that the address 

does not collide with the addresses listed in:

http://www.iana.org/assignments/multicast-addresses

Also, if the low order 23 bits of an address is the same as the local 
network control block, 224.0.0.0 – 224.0.0.255, then a collision may 
occur. To avoid this problem, provide an address that does not have 
the same bits in the lower 23 bits of the address as the addresses in 
this range.

Note:

Keep in mind that the hostname should remain the same. Please do 
not change the hostname.

Summary of Contents for Application Server 10g



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands