6.
On the back of the bezel, pull off the air filter.
7.
Replace the air filter with a new one. Do not reuse the worn air filter.
8.
Gently wipe the front fan bezel that contains the perforated air inlets with a clean,
dry cloth. You can alternatively remove the fan bezel from the system and use
compressed air to clean out the perforated air inlets.
9.
Install the air filter carefully in place behind the front
bezel.
Note:
Only the removable fan bezel has vent holes that require cleaning.
Note:
To prevent damage to the painted finish, do not use any solvents or
liquids to clean the perforated air inlets on the front of the chassis.
10.
Install the front bezel onto the Acme Packet 4600 by hooking the right side of the
bezel onto the chassis and then pivoting the bezel to the left until the magnet
catches the chassis. You may need to push on the left side of the display opening
to fully seat the bezel.
Chapter 6
Fan and Air Filter Maintenance
6-30