•
Perform all cabling procedures according to the established standards for your
organization.
To connect network optical cabling to the optical physical interface cards:
1.
Locate the fiber optic cables you plan to connect to the Acme Packet 4600. You
can choose from either P5 and P4 (10GbE), or P0, P1, P2 and P3 (1GbE).
2.
Slide the optical transceiver into the socket on the NIU.
3.
Press on the face of the optical transceiver to seat it in the socket.
4.
Flip the bale clasp latch back into the rest position.
5.
Connect the optical cables to their corresponding ports.
6.
Route the cable away from the Acme Packet 4600. Make sure that the fiber optic
cables are not stretched tightly or subjected to extreme stress.
Chapter 4
Cabling the Acme Packet 4600 System
4-20