Note:
Before opening the Acme Packet 4600, ground yourself using an ESD wrist
strap or other comparable grounding system. Failure to do so could damage
the Solid State Drive and the Acme Packet 4600.
Note:
Use a #2 Phillips-head screwdriver for all chassis cover and side screws.
1.
Unscrew the four countersunk screws on each side of the
Acme Packet 4600 that hold the chassis cover to the chassis.
2.
Set these screws
aside.
3.
Unscrew the seven countersunk screws on the top of the Acme Packet 4600 that
hold the chassis cover to the chassis. The following is an image of the top of the
chassis.
4.
Set the lid and screws aside.
5.
Lift the chassis lid off of the chassis and set aside.
Chapter 6
Upgrading or Replacing a Solid State Drive
6-22