V99S
_V25
0S_d
eclara
tion
-of
-incor
pora
tio
n_en.
fm
OPTIMUM
M A S C H I N E N - G E R M A N Y
®
EC - Declaration of Conformity
Installation declaration for incomplete machines according to Annex II B of the Machinery Directive 2006/42/
EC
The manufacturer / seller and author-
ised representative:
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt, Germany
Authorised representative for com-
piling all the relevant technical docu-
ments.
Kilian Stürmer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt, Germany
Tel.: +49 (0) 951 96555 - 800
hereby declares that the following product
Product designation:
Table feed
V99S
V250S
Type designation:
Table feed with emergency-stop for moving a milling table in an
axis plane.
The manufacturer declares that the product mentioned above is an incomplete machine in the sense of the
machinery directive. The product is exclusively provided for installation in a manual milling machine or
incomplete machine and therefore does not meet all the requirements of the machinery directive.
A list of the fundamental requirements applied to and to be observed for this product can be found in the
appendix to this declaration.
The special technical documents according to Annex VII Part B have been compiled. The authorised repre-
sentative for compiling the technical documents undertakes to hand over the documents on well-founded
request to the bodies of the individual state. The hand over is done by post in paper format or on electronic
medium.
The commissioning of the product is prohibited for as long as it has been established that the milling
machine in which the aforementioned product is installed corresponds to all the requirements of the
machinery directive.
Hallstadt, 2019-01-31
Kilian Stürmer
(CEO, General Manager)
