Operation and mounting V250S
Version 1.0 dated 2019-01-31
Page 11
Translation of the original instructions
V 99 S
│
V 250 S
GB
V99_
V250
_3_G
B.
fm
OPTIMUM
M A S C H I N E N - G E R M A N Y
®
3.2
Technical specification
INFORMATION
The travel speed of the table depends on the thread pitch of the spindle of the milling machine.
3.3
V250S Mounting
3.4
Mounting universal table feed
Remove the crank, the scale holder, the scale nut and the bearing flange from the spindle
of the milling machine.
Img. 3-3:
Example disassembly
Assemble - if necessary - an extension shaft.
The shaft end must bear against the inner bearing ring.
The internal thread of extension shaft is UNC 16 or 18.
Img. 3-4:
Mounting extension shaft
V 250S
Connection
220 V; ~ 50 / 60 Hz
max. torque [ Nm ]
73.5 Nm
Gearbox transmission ratio
4.8: 1
Speed [ rpm
]
4 - 160
Rapid traverse [ rpm ]
200
Weight 6
kg
Extension shaft
Inner bearing ring
