Optimum 3346245, Operating Manual

Page: 13 / 120

Safety
Version 1.0.4 - 2020-07-31 13 Translation of the original instructions
MZ4S GB
MZ
4S
_G
B_1.
fm

instruct the personnel in regular intervals (at least once a year) on
- all safety regulations relevant to the milling machine,
- operation of the milling machine,
- generally accepted engineering standards.
- possible emergency situations,

check the personnel‘s knowledge level,

document training/instruction in a operation book,

require personnel to confirm participation in training/instructions by means of a signature,

check whether the personnel is working safety and risk-conscious and observes the opera-
ting instructions.

Define and document the machine inspection deadlines in accordance with section 3 of the
Factory Safety Order and perform an operational risk analysis in accordance with section 6
of the Safety at Work Act.
Obligations of the user
Obligations of the
operator

have obtained a training regarding the handling of the milling machine,

keep an operator‘s log,

before taking the machine in operation
- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
Additional
requirements
regarding the
qualification
For work on the following milling machine parts there are additional requirements:

Electric components or operating materials: Must only be worked on by a qualified electri-
cian or person working under the instructions and supervision of a qualified electrician.
1.8 User positions
The operator position is located in front of the milling machine at the inspection window, to the
side of the automatic feed for the cross table or on the control panel.
1.9 Safety devices
The milling machine must only be operated with fully functional safety devices.
Stop the milling machine immediately if there is a failure on the safety device or becomes inef-
fective.
This is your responsibility!
If a safety device has been activated or has failed, the milling machine must only be used if you

have eliminated the cause of the fault and

you have verified that there is no danger to personnel or objects.
WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering
yourself and other persons working with the milling machine. The possible
consequences include:

injuries due to tools, workpieces or fragments hereof which are flying off at high
speed,

contact with rotating or moving parts,

fatal electrocution,

pulling-in of clothes.
WARNING!
Although the isolating safety devices provided and delivered with the machine are
designed to reduce the risks of workpieces being ejected or parts of tools or workpieces
breaking off, they cannot eliminate these risks completely. Always work carefully and
observe the limits of the machining process.