Version 1.1.8 - 2021-7-29
117
Translation of original instructions
MB4P
ǀ
MB4PV
EN
MB4P_
M
B4PV
_GB
_8.
fm
As the machine operator, you should obtain information regarding the authorized collection or
disposal system which applies for your company.
Please make sure that the electrical components are disposed of professionally and according
to the legal regulations. Please only throw depleted batteries in the collection boxes in shops or
at municipal waste management companies.
7.7.1
Decommissioning
CAUTION!
Used machines need to be decommissioned in a professional manner in order to avoid
later misuse and endangerment of the environment or persons.
Disassemble the machine if required into easy-to-handle and reusable assemblies
and component parts.
Dispose of machine components and operating fluids using the intended disposal
methods.
7.7.2
Dismantling
Pull the power cord or disassemble the connection cable and disconnect the connection
cable.
7.7.3
Disassembly
Drain the oil
from the gear, drain hole “Gear milling head“ on page 107
Drain the cooling lubricant, coolant drain
"Cooling lubricant system“ on page 109
Disassemble the drive motor
7.7.4
Packing and loading
Place the machine on 1 palettes to allow for removal transport
"Installation and assembly“ on page 82
7.8
Disposal of new device packaging
All used packaging materials and packaging aids from the machine are recyclable and gener-
ally need to be supplied to the material reuse.
The packaging wood can be supplied to the disposal or the reuse.
Any packaging components made of cardboard box can be chopped up and supplied to the-
waste paper collection.
The films are made of polyethylene (PE) and the cushion parts are made of polystyrene (PS).
These materials can be reused after reconditioning if they are passed to a collection station or
to the appropriate waste management enterprise.
Only forward the packaging materials correctly sorted to allow direct reuse.
7.9
Disposal of lubricants and coolants
ATTENTION!
Please imperatively make sure to dispose of the used coolant and lubricants in an
environmentally compatible manner. Observe the disposal instructions of your
municipal waste management companies.
INFORMATION
Used coolant emulsions and oils should not be mixed up since it is only possible to reuse used
oils without pre-treatment, if they have not been mixed.
