Maintenance
Version 1.0.2 - 2020-07-06
38
Translation of original instruction
DH 40CT | DH 40CTP
EN
D
H
4
0
CT_DH40CTP_G
B_5
.f
m
5.1.2
Restarting
Before restarting, run a safety check.
WARNING!
Before starting the drilling milling machine you must be sure that
lead to any danger with respect to people,
the drilling milling machine is not damaged.
5.2
Inspection and maintenance
The type and level of wear depends to a large extent on the individual usage and operating
conditions. Any indicated intervals therefore are only valid for the corresponding approved con-
ditions.
Interval
Where?
What?
How?
Start of shift
after every
maintenance or
repair work
Dri
lli
ng
mil
lin
g
machi
n
e
Start of shift
after every
maintenance or
repair work
Sp
in
dl
e he
a
d
Oi
l l
eve
l
Check if the oil level can be seen in the oil sight glass. The
sight glass should be half-covered.
Img.5-1:
Oil sight glass
Oil level
Oil sight glass
