Maintenance
Version 1.0.2 - 2020-07-06
37
Translation of original instruction
DH 40CT | DH 40CTP
EN
D
H
4
0
CT_DH40CTP_G
B_5
.f
m
5
Maintenance
In this chapter you will find important information about
Inspection
Maintenance
Repair
of the drilling milling machine
ATTENTION!
Properly performed regular maintenance is an essential prerequisite for
operational safety,
failure-free operation,
a long working life of the drilling milling machine and
the quality of the products which you manufacture.
Installations and equipment from other manufacturers must also be in good order and condition.
ENVIRONMENTAL PROTECTION
During work on the spindle head, please make sure that
collecting containers with sufficient capacity for the amount of liquid to be collected
are used.
Liquids and oils should not be split on the ground.
Clean up any spilt liquid or oils immediately using proper oil-absorption methods and dispose of
them in accordance with current environmental protection regulations.
Collect leakages
Do not re-introduce liquids spilt outside the system during repair or as a result of leakage from
the reserve tank; collect them in a collecting container for disposal.
Disposal
Never dump oil or other environmentally hazardous substances which are harmful to the envi-
ronment in water inlets, rivers or channels.
Used oils must be delivered to a collection centre. Please consult your supervisor for further
information on your nearest collection point.
5.1
Safety
WARNING!
The consequences of incorrect maintenance and repair work may include:
extremely serious injuries to those working on the drilling milling machine and
damage to the drilling milling machine.
Maintenance and repair work on the drilling milling machine must be carried out by
qualified technical personnel only.
5.1.1
Preparation
WARNING!
Only work on the drilling milling machine if it has been disconnected from the power
supply.
Switching-off and securing the drilling milling machine on page 15
Attach a warning label.
