Safety
Version 1.0.2 - 2020-07-06
8
Translation of original instruction
DH 40CT | DH 40CTP
EN
D
H
4
0
CT_DH40CTP_G
B_1
.f
m
1.3
Intended use
WARNING!
In the event of improper use, the drilling milling machine
will endanger personnel,
will endanger the machine and other material property of the operating company,
the functionality of the drilling milling machine may be compromised.
The drilling milling machine is designed and manufactured for holes in cold metals or other non
flammable materials or that not constitute a health hazard using a rotating filing-stripping tool
that has a number of grooves for collecting the filings.
If the drilling milling machine is used in any way other than described above, or modified with-
out the approval of Maschinen Germany GmbH, then the drilling milling machine is being used
improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee will expire, if any constructive, technical or proce-
dural changes are not performed by the company Optimum Maschinen Germany GmbH.
It is also part of the intended use that you
observe the limits of the drilling milling machine,
the operating manual is observed,
the inspection and maintenance instructions are observed.
WARNING!
Extremely severe injuries.
It is forbidden to make any modifications or alternations to the operation values of the
drilling milling machine. They could pose an accident hazard to persons and cause
damage to the drilling milling machine.
Switching on forbidden!
Use ear protection!
Read the operating
instructions before
commissioning!
Pull out the mains plug!
Wear protective glasses!
Wear protective gloves!
Wear safety shoes!
Wear a protective suit!
