![background image](http://html1.mh-extra.com/html/opticis/odm1818/odm1818_user-manual_1641716010.webp)
USER MANUAL
DVI MATRIX ROUTER
– ODM1818
ODM1818 Manual - Edition 7a
Page 10
Example Setting
In case of 000
In case of 001
In case of 255
All command codes are required to have the Router ID in its header. For more details,
refer to the command code instruction in Chapter. 3.2.
2.2 Front Panel Interface
All communications with ODM1818 is can be done using the front input keys - without
video controller or control PC.
Before pressing control keys, make sure that the LCD display shows
USER MODE
.
CREATE, PREVIEW
and
CANCEL
keys are activated and deactivated by pressing
each key repeatedly - the activated key is executed by pressing
ENTER
key.
The FUNCTION
has the ability to select multiple features on the ODM1818.
Repeatedly pressing the
FUNCTION
key will display each feature on the LCD
display.
To save the selected feature, press
ENTER -
to escape current setting, press
another control key; i.e.
CREATE
or
PREVIEW
.
2.3 CREATE Mode
Configures Input-Output connections for cross switching.
1) Press CREATE button once to activate (orange color LED is on) - LCD will display
the Input channel.
2) Select and Press an input key (the respective Green LED is on)
– LCD will display
Input channel number.
3) Press single or multiple Output buttons to select desired outputs (Red LED is on for
each selected Output button).
4) Outputs can be deselected by pressing the respective Output button (Red LED is off)
5) Press ENTER to save the selected configuration.
6) To configure the next Input to Output or outputs, repeat steps 1 to 5.
2.4 PREVIEW Mode
PREVIEW mode shows current Input-Output configuration.
1) Press PREVIEW button.
2) Press any Input button (Green LED is on) to see the current connected Output (indi-
cated by Red LED is on)
3) To preview status of another Output, press another Input button.
To see the status of all Input-Output connections, press
PREVIEW
then
ENTER
.